From standard CNC milling and turning to complex 5-axis machining, precision machining and coordinated secondary services, we select the manufacturing route based on your drawing, geometry, tolerances, material and quantity.
Reliable machining support for a wide range of custom parts, from simple components to multi-operation projects.
A flexible route for custom metal and engineering plastic components that may combine milling, turning and coordinated secondary operations.
Machining support for pockets, slots, holes, flat faces and multi-side features in housings, brackets, plates and tooling components.
Turning support for shafts, sleeves, bushings, collars, threaded parts and other rotational components with drawing-defined interfaces.
Additional machining processes for challenging geometry, tighter tolerances and special features.
For complex multi-face geometry
Machining support for complex angles and multi-side features where fewer setups can improve process consistency.
For tolerance-critical components
Machining support where dimensional relationships, fits, datum control and inspection requirements are critical.
For fine profiles and difficult features
For conductive metals with narrow slots, fine profiles and precision-cut features that are difficult to produce with conventional cutting tools.
Additional services that support drawing-based custom part projects beyond machining.
Coordinated finishing through qualified partners, including anodizing, plating, painting and other project-specified finishes.
Explore Surface FinishingComponent and subassembly support based on your drawings and project requirements.
Explore AssemblyCustom production tooling, fixtures and workholding solutions for machining, inspection and repeat production.
Explore Fixtures & JigsPrototype, low-volume and repeat-order production support for drawing-based custom components.
Explore On-Demand ManufacturingThe right machining route depends on your part geometry, tolerances, material, quantity and inspection requirements. Use this guide as a starting point, or send us your drawing for engineering review.
Send Your Drawing for Review| Your Part Type | Recommended Route |
|---|---|
| Plates, brackets, housings | CNC Milling |
| Shafts, sleeves, bushings | CNC Turning |
| Complex multi-face geometry | 5-Axis CNC Machining |
| Tight fits / critical dimensions | Precision Machining |
| Fine slots / difficult profiles | Wire EDM |
| Mixed geometry / multi-process parts | CNC Machining |
This guide is only a starting point. Final process selection is confirmed after drawing review.
Upload your CAD drawing and our engineering team will review your project requirements and prepare a quotation.
Drawing review before quotation.
Upload Your Drawing
