Machined Housings
Machined housings assembled with bearings, bushings, seals, covers, or related hardware where specified.
Assembly Services for CNC Machined Parts
CNC Machined Parts Assembly Services
HongKe CNC can machine your parts, source standard hardware, assemble the components, inspect the completed assembly, and coordinate delivery through a single manufacturing partner.
Reduce supplier coordination and receive assemblies ready for your next production step.
- CNC Machining
- Hardware Sourcing
- Mechanical Assembly
- Final Inspection
Our Process
From Individual Parts to a Ready-to-Use Assembly
We coordinate machining, hardware sourcing, assembly, and inspection so you can receive a more complete component set through one purchase order.
- 01
Machined Parts
CNC machining to your drawings.
- 02
Purchased Hardware
Standard components sourced according to the BOM or agreed specification.
- 03
Assembly
Components assembled according to the drawing and agreed requirements.
- 04
Inspection
Fit, orientation, hardware installation, and overall assembly condition are checked.
- 05
Pack & Ship
Assemblies packed and prepared for shipment.
Our Capabilities
What We Can Assemble for You
From simple machined sub-assemblies to multi-part component sets, we support common mechanical assembly requirements for CNC machined parts.
Shaft & Spacer Assemblies
Machined shafts, spacers, collars, and retaining components supplied as matched component sets or assemblies.
Enclosures & Covers
Machined covers and housings assembled with specified fasteners, inserts, or sealing components.
Threaded Hardware
Installation of screws, studs, threaded inserts, and other specified mechanical hardware.
Pin & Dowel Assemblies
Installation of locating pins, dowel pins, and selected press-fit components according to drawing requirements.
Multi-Part CNC Assemblies
Multiple machined components and purchased hardware combined into a completed mechanical assembly.
Assembly Methods
Assembly Methods We Commonly Handle
Mechanical Fastening
Screws, bolts, nuts, washers, and specified locking hardware assembled according to drawing requirements.
Press-Fit Components
Selected bearings, bushings, pins, and other press-fit components installed where specified.
Threaded Inserts
Threaded inserts and related hardware installed into machined components where required.
Fitting & Alignment
Mating parts checked for orientation, alignment, and basic fit during assembly.
Engineering Support
Assembly Requirements We Review Before Production
Reviewing the assembly before machining helps identify fit, tolerance, hardware, and revision issues before they cause assembly problems.
Assembly Drawing
Review the overall assembly structure, mating relationships, and important assembly dimensions.
BOM & Revision
Confirm component quantities, purchased hardware, part numbers, and current drawing revisions.
Fit Requirements
Review clearance, interference, locating features, and other important mating conditions.
Acceptance Criteria
Confirm agreed visual, dimensional, functional, and inspection requirements for the completed assembly.
Simplify Your Supply Chain
Reduce the Number of Suppliers You Need to Manage
Traditional Supply Chain
Multiple vendors can mean more purchase orders, more coordination, longer scheduling chains, and more handoffs of responsibility.
- Machining Supplier
- Hardware Supplier
- Secondary Process Supplier
- Assembly
- Inspection
- Customer
Multiple handoffs to coordinate
HongKe CNC Coordinated Supply
Consolidate more of your machining, sourcing, assembly, and inspection scope with one primary supplier.
- Machining
- Coordinated Secondary Processes
- Hardware Sourcing
- Assembly
- Inspection
Coordinated Delivery
Assembly Examples
Examples of CNC Machined Assemblies
Typical assembly examples showing how machined components and specified hardware come together.
Machined Housing + Bearing
A machined housing supplied with the specified bearing installed.
Housing + Threaded Inserts
Machined housing with specified threaded inserts installed before shipment.
Cover + Seal + Fasteners
Machined cover or enclosure assembled with specified sealing components and hardware.
Shaft + Spacer Assembly
Machined shaft and spacer components supplied as a matched or assembled set.
Quality Assurance
Check the Completed Assembly, Not Only the Parts
Individual parts may meet their drawing requirements while the completed assembly still needs to be checked as a system.
Component Verification
Confirm the correct components and required hardware are present.
Fit & Alignment
Check mating conditions, alignment, and basic movement where applicable.
Hardware Check
Verify specified fasteners, inserts, and purchased components are installed.
Visual Inspection
Check the completed assembly for obvious damage, contamination, or assembly issues.
Functional Check
Perform agreed basic movement, engagement, or fit checks where applicable.
Inspection Records
Provide inspection documentation when included in the agreed scope.
Get a Quote
What to Send for an Assembly Quote
The more complete the assembly information, the more accurately we can review the machining, hardware, fit, and assembly scope.
- Assembly drawing
- Individual part drawings
- 3D models
- Bill of Materials (BOM)
- Hardware specifications
- Assembly notes
- Inspection requirements
STEPAssembly.step
PDFHousing.pdf
PDFCover.pdf
XLSXBOM.xlsx
PDFAssembly.pdf
Bundle multiple files, including spreadsheet BOMs, into a single ZIP file of up to 20 MB.
Upload Assembly FilesFrequent Questions
Assembly FAQ
Can you assemble CNC machined parts before shipment?
Yes. We can combine machined components and specified hardware before shipment. Assembly drawings, fit requirements, and the agreed scope are reviewed before production.
Can you source standard hardware for the assembly?
Yes. Standard hardware can be sourced according to your BOM or an agreed specification. Part numbers, quantities, and any proposed substitutions are confirmed before procurement.
Can you install bearings, bushings and threaded inserts?
Bearings, bushings, pins, and threaded inserts can be installed where specified. The fit, installation method, and part geometry are reviewed before confirming the work.
Can assembled parts be inspected before shipment?
Yes. The completed assembly can be checked for component presence, fit, alignment, visual condition, and agreed basic functional requirements. Inspection documentation can be provided when included in the agreed project scope.
Can machined parts and assemblies be supplied under one purchase order?
Yes. Machining, purchased hardware, the agreed assembly scope, and inspection can be coordinated under one purchase order. Partner-supported secondary processes and delivery requirements can also be included where applicable.
What files are needed for an assembly quotation?
Send the assembly drawing, individual part drawings, 3D models, BOM, hardware specifications, and inspection requirements you have. Bundle multiple files, including spreadsheet BOMs, into a single ZIP file of up to 20 MB. Incomplete information can be reviewed with our team.
Ready to Simplify Your Assembly Supply Chain?
Send Your Assembly Drawings & BOM
Coordinate machining, hardware sourcing, assembly, and inspection through one manufacturing partner.